|
|
| Computerized Tensile Testing Machine |
|
|
| |
Write Up for Computerised Tensile Testing Machine for all the Three Models 1.3D, .
1) Computerized Tensile Testing Machine having LCD Display unit which shows Load , Elongation, Last samples Maximum Load, Elongation at the time of auto reverse. Controller can save last 5 samples readings .
2) Tensile, Comprassive, Flexural, Shear, Bend, Bond, peel ,etc test can be carried out without making any change in the panel.
3) Speed variation through AC/DC Variable Drive , Stepper & Servo Control
4) The accuracy of the machine is within its tolerance limit of + or – 1%.
5) Force Measurement will be available in Kg ,Newton, KN & MPA.
6) Elongation through Encoader for high accuracy .
7) Auto Reverse & Auto Break facility.
8) Over load & over travel facility are provided in controller.
9) Computer Connection Through 9 pin serial Port( RS 232)
10) Over load & Over Travel safety also provided.
11) Speed Control through software programme.
12) Software can calculate the results as per below:-
• Maximum Load
• Elongation at maximum load
• Elongation percentage at maximum Load
• Tensile Strength at maximum Load
• Break load
• Elongation at Break Load
• Elongation percentage at break load
• Tensile strength at break load
• Yield Load
• Elongation at Yield Load
• Elongation percentage at Yield load
• Tensile strength at Yield load
• Modulus of Elasticity
1. You can see results in any unit KG/cm2, KG/mm2, N/cm2, N/mm2, KN/cm2, KN/mm2 & MPA. Software will calculate all the data as per the unit selection.
|
|
